Skip to content

Carlson Survey

$2,150.00

Carlson Survey is designed to complement land surveying operations and provides a variety of survey features to process data from surface modeling to Least Squares Network Adjustment. Users work seamlessly between the office and the field by utilizing company-wide design styles for ease of use and efficiency.

See Available Discounts in Cart

Options:

Quantity:
Category:

Description

Carlson Survey can be purchased as a standalone module or as part of the Civil Suite which also includes Civil, Hydrology and GIS. It can run standalone with the included license of IntelliCAD or on top of a separately purchased license of full AutoCAD. All Carlson Software purchases will be delivered by email with your new serial number and download instructions within two business days.

Carlson Survey includes features that are comparable to the survey and GIS components of programs such as: DCA/Softdesk/Land Desktop, AutoCAD Map, Civil 3d, Eagle Point, TerraModel, GeoPak and InRoads.

General Features
  • Built on AutoCAD and IntelliCAD
  • Carlson Survey will run in AutoCAD® as well as AutoCAD® Map, Land Desktop and Civil3D and also on IntelliCAD.
  • Project Setup – Flexible data storage methods
  • Drawing Cleanup – Fix common drafting errors
  • Drafting Enchancements – Handy tools for working in AutoCAD® such as Join Nearest, Shrinkwrap Entities, Polyline Utilities, Drawing Inspector, Layer Inspector and Twist Screen
  • Data Compatibility – Supports industry standard LandXML and scores of specific data conversions
Surfaces
  • Build Surfaces – By triangulation or rectangular grids
  • Contouring – One step triangulate and contour from 3D entities as well as contouring from surface files
  • Surface Manager – Change surface display properties and adjust surface functions to add and remove points and breaklines and swap edges
  • Volumes – Earthwork volumes between triangulation or grid surfaces
  • Pad Design – Tie cut/fill slopes from pad perimeter to surface, build pad surface, calculate and balance volumes, and edit pad parameters
Centerlines
  • Design and Edit Centerlines – Design or input alignments on screen or in dialog with graphics
  • Label Stations and Offsets – Annotate station and offsets along centerline and at selected points
  • Calculate Offsets – Reports stations and offsets for selected points along centerline
  • Create Offset Points – Create points at specified stations and offsets
  • Spirals – Flexible handling of the most complex spiral curves including “spiral-only” elements going arc-spiral-arc, arc-spiral-line and line-spiral-line
Profiles
  • Create Profiles – From surfaces, screen entities, points on centerline, etc.
  • Quick Profile – One step profile creation with real-time update while adjusting centerline
  • Input-Edit Profiles – Enter profile data in dual spreadsheet and graphic window, and design in reference to controlling profile grade points
  • Draw Profiles – Draws profiles on grids or plan-profile sheets with auto-updating based on edits
  • Profiles To 3D – Create points and 3D polylines from profiles
Points
  • Import/Export – User-defined import and export of point data along with conversions with specific other formats
  • Draw Points – Draw points with settings for symbols, layers and styles
  • Point Groups – Point group manager to define sets of point by filters
  • Coordinate File History – Tracks all changes to points with report and undo functions
  • Fix Point Label Overlaps – Finds point label overlaps with rule options to fix automatically
  • Point Tools – Utilities for modify point labels such as move with leader, twist and resize
Survey
  • Data Collection Interfaces – Upload and download to popular data collectors
  • Traverse Adjustment – Spreadsheet editor for raw data with graphics and processing for traverse adjustments
  • SurvNET – Advanced network least-squares for total station, GPS and level data
  • Field-to-Finish – Draw points with styles and in point groups set by point descriptions and draw linework by several flexible methods
  • Field-to-Finish Inspector – Inspect all field-to-finish elements, see description source and re-draw based on descriptions edits
  • COGO – Streamlined inverse, traverse, sideshot, intersections, interpolation, translate, rotate, scale and align
  • Coordinate Transformations – Transform coordinates and screen entities between lat/lon and grid projections as well as local to local by Helmert and least-squares methods
  • Deeds – Enter deed by description, read deed data from deed file, deed reports, deed correlation and generate legal description from drawing
  • Cut Sheets – Create custom cut sheet reports with reference grades and station-offsets
Area/Layout
  • Label Areas – Customized area label styles and several methods to select areas to label
  • Size Areas – Sliding side area, hinged area, area radial from curve and bearing area cutoff
  • Lot Manager – Lot definitions by point numbers with functions to create lots, conduct mapcheck for closure, edit in spreadsheet with graphics, report lots and draw lots
  • Lot Layout – Size lots along alignment with controls for target area, setback and frontage
  • Offsets, Intersection and Cul-de-Sacs – Layout for ROW and EOP linework
Annotation
  • Angle & Distance Labels – Flexible routines to label linework in all possible layout combinations plus available rules to automatically fix label overlaps and revise labels when entities move
  • Curve Labels – Label curve data in stack, along arc or in table
  • Survey Text – Routines to create typical plat labels such as offset and building dimensions
  • Label Elevations – Label spot elevations along an alignment
  • Linetypes – Draw special linetypes

New for 2023

2023 General Carlson Software Improvements

AutoCAD 2023 – Added support for this new version
IntelliCAD 11.0 (pre-release) – Added support for this new version
Improved interaction between Rollover Tooltips and Drawing Inspector display
Export KMZ file has improved shading/transparency
Improved consistency of dialog boxes
Added Search function for selecting Zones for State Plane Projections and consistency of Projection selection
Drawing Inspector dialog box now allows multiple changes at a time

2023 Improvements - Survey

Added option to set a symbol rotation in Field to Finish
Added the ability to Edit a GNSS base point coordinates and adjust the associated side shots
Added support for GONS in radial stakeout
Added option to invert arcs when using sketch tree line
Improved processing speed for Field to Finish
Added access to the Symbol Library directly from the Draw Field to Finish dialog box
Added support for GONS in Annotate Defaults and Label Angle
Improved control over stationing centerlines including when importing from a CL file
Added new option in Field to Finish to Auto-Annotate Lines, Arcs and Areas
Added option to use Mtext in Label latitude longitude coordinates
Added option in Edit/Process Raw to draw side shots from single occupied point for draw traverse/sideshot lines
Added individual horizontal and vertical residual display and process control in Best-Fit Point
Added option to use Point Names when converting Civil 3D Points to Carlson Points
Added more decimal options for Map Check
Added option for reporting residuals between measured and stored points in Edit/Process Raw
Added Global Edit options for GIS/Note/Point Attribute Labels in Field to Finish
Added ability to select and draw multiple centerline files.

Videos

Screenshots





System Requirements

For Carlson’s CAD-Based Products

Note: Carlson products installed on top of the CAD products of IntelliCAD or AutoCAD, are subject to the same requirements as the CAD engine itself. Please follow the requirements for the CAD platform listed below and allow an additional 750 MB of hard-drive space for the Carlson application.

Carlson 2016-2018 with IntelliCAD 8.x

  • Compatible with 32 or 64 bit Windows Vista, 7, 8, 8.1, and 10
  • For hardware requirements, see Carlson 2013-2015* below

Carlson 2013-2015* with IntelliCAD 7.2

*Starting with 2013 build 130120

Intel® Pentium® 4 or comparable (minimum), Intel i7 or at least Intel i5 or comparable (recommended). Due to the variety of processors on the market, one can use cpubenchmark.net/cpu_list.php to do comparative analysis. While the overall processor score matters, the single thread performance is of the most interest.

  • 32-bit Windows 7-8.1: 1 gigabyte (GB) of RAM minimum for, 4 GB recommended.
  • 64-bit Windows 7-8.1: 2 GB of RAM minimum for, 8+ GB recommended.
  • Windows Vista: 1 GB of RAM minimum, 4 GB recommended.
  • Windows XP: 512 megabytes (MB) of RAM minimum, 2 GB recommended.

Graphics card compatible with OpenGL Version 1.4 or higher:

  • Recommended are desktop graphics level discrete (not integrated cards like Intel HD) graphics cards.
  • Preferably Nvidia Geforce due to their more consistent driver support.
  • Discrete ATI/AMD cards will be adequate, but ATI’s driver support has been spotty and user is frequently deferred to the computer manufacturer for support.
  • Professional Nvidia Quadro cards are not currently recommended due to driver issues.
  • Powerful gaming cards are not required and probably would not provide as much benefit as investment in more memory or better CPU

Carlson 2012 and earlier with IntelliCAD 7.1 and 6.x based products

  • Windows® XP, Windows® Vista, Windows® 7
  • Intel Pentium® or more powerful processor
  • 64-bit machines are supported, but application itself is 32-bit
  • 1 GB RAM (minimum), 4 GB recommended (for complex drawings)
  • 400 MB of free hard disk space (1.2 GB Total, see Note above)

AutoCAD®

Please visit the AutoCAD System Requirements page for current specifications which are subject to change without advance notice.

Please visit the Autodesk summary of the Operating system compatibility for AutoCAD (Autodesk Bulletin TS14078105) for historical references between AutoCAD and its supported operating system(s).

Please see Note above for hard disk space requirements for the Carlson application.

Embedded AutoCAD® OEM Engine

Carlson solutions based on AutoCAD 2018 Embedded

Takeoff R10 / Survey OEM 2018

Please note the CPU compatibility below: older AMD CPUs like Athlon XP+ do not support SSE2 technology and can not run Embedded AutoCAD 2018 products.

  • Microsoft Windows 10 (64-bit only); Microsoft Windows 8.1 with Update KB2919355 (32-bit & 64-bit); Microsoft® Windows® 7 SP1 (32-bit & 64-bit)
  • 4 GB RAM (minimum), 8 GB (recommended)
  • 2 GB free disk space for installation
  • 1360 x 768 (1920 x 1080 recommended) with True Color
  • Windows Internet Explorer® 11 or later
  • Install from download or DVD

Carlson solutions based on AutoCAD 2013 Embedded

Takeoff R6, R7, R8, R9 / Survey OEM 2013, 2014, 2015, 2016, 2017

Please note the CPU compatibility below: older AMD CPUs like Athlon XP+ do not support SSE2 technology and can not run Embedded AutoCAD 2013 products.

  • Windows® 8 and 10 Standard, Enterprise, or Professional edition (8 requires installation of AutoCAD LT 2013 Service Pack 2); Microsoft® Windows® 7 Enterprise, Ultimate, Professional, or Home Premium edition (SP3 or later) with an Intel® Pentium® 4 or AMD Athlon™ dual-core processor, 3.0 GHz or higher with SSE2 technology.
  • 1 GB RAM (minimum), 8 GB (recommended)
  • 1.4 GB free disk space for installation
  • 1,024 x 768 VGA display with true color
  • Internet Explorer 7.0 or later
  • Install from download or DVD

Carlson solutions based on AutoCAD 2010 Embedded

Takeoff R4, R5 / Survey OEM 2010, 2011, 2012

Please note the CPU compatibility below: older AMD CPUs like Athlon XP+ do not support SSE2 technology and can not run Embedded AutoCAD 2010 products.

  • Microsoft Windows 7, or,
  • Windows Vista, SP1 or later (Enterprise, Business, Ultimate, Home Premium) operating system, with,
  • Intel Pentium 4 processor or AMD Athlon dual-core processor, 3.0 GHz or greater with SSE2 technology
  • 1 GB RAM (minimum), 8 GB (recommended)
  • 850 MB free disk space for installation
  • 1024 x 768 VGA display with true color
  • Microsoft Internet Explorer 7.0 web browser or later
  • DVD drive

Or

  • Microsoft Windows XP Professional or Home Edition operating system (SP2 or later), with,
  • Intel Pentium 4 or AMD Athlon dual-core processor, 1.6 GHz or greater with SSE2 technology
  • 512 MB RAM
  • 850 MB free disk space for installation
  • 1024 x 768 VGA display with true color
  • Microsoft Internet Explorer 7.0 web browser or later
  • DVD drive

Carlson solutions based on AutoCAD 2007 Embedded

Takeoff R2, R3 / Survey OEM 2007, 2008, 2009
  • Microsoft Windows 7, or,
  • Windows Vista, or,
  • Windows XP Home or Professional SP1 or better, or,
  • Windows XP for Tablet PC SP2, or,
  • Windows 2000 SP3 or better
  • Pentium III 800 minimum, Intel Pentium IV recommended
  • 512 MB RAM
  • 550 MB free disk space for installation
  • 1024 x 768 with True Color
  • Microsoft Internet Explorer 6.0 SP1 or higher
  • CD-ROM drive
  • Mouse, trackball, or compatible pointing device

Carlson solutions based on AutoCAD 2004 Embedded

Takeoff R1 / Survey OEM 2004, 2005, 2006
  • Microsoft Windows XP (Professional, Home Edition, or Tablet PC Edition), or,
  • Windows 2000, or Windows NT 4.0 (SP6a or later)
  • Pentium III 800 minimum, Intel Pentium IV recommended
  • 256 MB RAM
  • 300 MB free disk space for installation
  • 1024 x 768 VGA with true color (minimum)
  • Microsoft Internet Explorer 6.0
  • Mouse, trackball, or compatible pointing device
  • CD-ROM drive

Free Support

Carlson Software Works For You

A customer’s relationship with Carlson Software goes beyond simply purchasing our software – with Regional Managers throughout the country, free technical support for life, and training options for any budget – we’ve got you covered!

Direct Technical Support
  • Hours: Monday – Friday, 8:00 AM – 6:00 PM (EST)
  • E-mail: moc.wsnoslrac@troppus
  • Problems/Suggestions: Send in a report
  • Telephone: 606-564-5028
  • Fax: 606-564-6422